Watch the video above for assistance in completing this repair. It is similar for both cellular and GPS models except the cellular models have less parts to unscrew

Here is some tools you may need to help you complete the repair.

• #11 Point Knife Blades x5
• uFix iOpener Heat bag
• iFlex opening tool
• 1mm TESA Tape
• Apple Watch Series 3 42mm GPS+LTE Force Touch Gasket
• Fine Tipped Curved Tweezers
• Black Spudger
• Soldering iron
• iGadget 5x Plastic Opening cards
• Screw Mat

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone (0508 IGADGET) or by email

• Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
• Always power down your device prior to working on it
• Make sure you always unplug the battery before attemping any component removal
• When attempting to remove the screen, be careful not to push the blade or iFlex tool in too far or too hard, doing so may cause damage to the internal parts. Only 3mm depth is required to cut the adhesive. Draw a mark on your tool to help with depth management.
• Test the LCD is functioning properly before sealing up the device
• When removing the screen, it is very easy to tear the force touch gasket. We recommend having a spare force touch gasket on hand incase this happens to prevent issues after replacement.
• Micro-soldering skills are required to complete this repair