Name: iPhone 14 Rear Glass Cover with Frame and Camera Lens
Brand: iGadget
SKU: IP1480SP-BLK
Price: 44.99 NZD
Availability: InStock

Product Details

If you have smashed the back glass on your iPhone 14, you will need this glass replacement. This rear glass includes the back clip-in frame and camera lens and includes small parts such as the MagSafe magnets

Part Includes:

Back Coloured Glass
Colour Camera frame and glass lens
Perfect fit clip-in Frame
MagSafe Magnets preinstalled

FYI

Replacement Rear Glass includes back panel adhesive but does not include the NFC coil and mic, this will need to be transferred

Compatible Model Numbers

iPhone 14

Model Number (A Number)

A2649
A2881
A2882
A2883
A2884

iPhone 14 Model Numbers

Model Identifier

iPhone15,5

EMC Number

EMC 8183
EMC 8142
EMC 8143
EMC 8144

Device Number (M Number)

MPVH3
MPWM3
MPXL3
MPUX3
MPW83
MPX73
MPUA3
MPVV3
MPWU3
MPUN3
MPW23
MPX13
MPV73
MPWF3
MPXE3
MPVN3
MPWP3
MPXN3
MPV03
MPWA3
MPX93
MPUF3
MPVX3
MPWW3
MPUR3
MPW43
MPX33
MPVA3
MPWH3
MPXG3

View all ModelsView less

* Please note, to make searching the device number (M Number) easier, we have only listed the part numbers (First 5 characters), we have removed the region numbers as there is no difference in parts. For example, if "M Number" is "MC922LL/A". we remove the "region" portion and everything after (the "LL/A" at the end) leaving us with "MC922".

More info Less info

Installation Help

Checkout the step-by-step guide below for assistance in completing this repair

iFixit iPhone 14 Rear Glass Replacement Guide

Here is some tools you may need to help you complete the repair.

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone (0508 IGADGET) or by email

Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your phone and tape the screws to the right places or use a screw mat
Always power down your device prior to working on it
Make sure you always unplug the battery before attemping any component removal
The connector to the logicboard can be tricky to align correctly so it fits into place, we recommend taking a pencil and tracing the original charging port so you know exactly where it gets positioned and lining the new charger port within the pencil lines
Don't forget to remove the sim tray when removing the logicboard